PRODUCT

Sand Filters

Sand Filters Pluvitec are manufactured under the most stringent criteria in order to provide the market a product above international standards.

Without geographics limits to sale
Over 40 Years In The Market
Great Cost Benefit

Product Description

Sand filters Pluvitec are manufactured under the most stringent criteria in order to provide the market a product above international standards.

To optimize this performance, we have developed and patented our own crepina high performance which, combined with a good spatial distribution, allows us to have one of the lowest loss in the market charging filters.

A high-tech treatment with pickling, phosphatizing and application of epoxy resin and polyester resin powder, applied electrostatically to 90,000 volts, and cured in an oven at 230 °C ensures a high quality protection, both in relation to water and contaminants, as the ultra violet, can be installed in the field, in the open, ensuring life for many years.

To know our Sand Filtration Systems, click below:

https://hidrosolo.com.br/en/produto/irrigacao/sistemas-de-filtragem-em-areia

Construction characteristics

Model	Backwash flow (m³/h) *	Pressure Service (mca)	Ø Body (mm)	Ø Input/Output	Total height (mm)	Number of crepines	Sand (kg) **	Weight without sand (kg)
FA7	9	80 (8 bar)	400	Victaulic - 2"	1,100	6	70	50
FA11	16	80 (8 bar)	500	Victaulic - 2"	1,145	10	110	55
FA16	20	80 (8 bar)	600	Victaulic - 2"	1,150	12	155	86
FA25	32	80 (8 bar)	750	Victaulic - 3"	1,250	20	235	118
FA36	45	80 (8 bar)	900	Victaulic - 3"	1,315	34	360	195
FA42	62	80 (8 bar)	1,050	Victaulic - 3"	1,335	36	480	282
FA65	72	80 (8 bar)	1,200	Victaulic - 4"	1,400	48	620	450

* Backwash flow rate determined by a rise velocity of 0.02 m/s, using the recommended sand particle size which is 0.6 to 1.0 mm, yielding an approximate 30% expansion.

** Sand quantity calculated based on a 35 cm bed height.