Aguarde. Carregando informações.

Softeners


   Hidro Solo softeners are the most modern in removing calcium and magnesium from water.

   The operating system by automatic valves allows a precise operation demand, that is, the entire volume of water, and therefore Calcium and Magnesium, volume is measured, and then regeneration occurs depending of the amount of softened water, automatically.

  This allows an operation under control, with better water quality and lower brine consumption.

   This feature is not present in the softeners which regeneration control is made by time, occurring or not water consumption in the period.

   This translates into an obvious brine waste in low usage periods, or into "hard water" passing through if consumption exceeds the designed volume. Hidro Solo softeners can operate in continuous supply conditions, when during regeneration the softened water supply is not ceased.

  It does not require manpower for execution of regeneration since it is fully automatic, leaving to the operator the function of filling the brine tanks with salt (in solid state).

Disadvantages of hard water

 Compromises the performance of detergents, reducing its efficiency and requiring the use of greater amounts of this product, especially in textile industries and laundries.

 Promotes the formation of scale in boiler pipes and heat exchangers, compromising their thermal performance and even invalidating its use.

Exclusive advantages of softeners Hidro Solo

  • The fully automatic valve works depending on the volume of effectively softened water, regardless of  the elapsed time, ensuring high quality, efficiency and preventing brine waste.
  • The regeneration occurs only when it is required, the valve registers the exact softened water quantity to start the operation, avoiding unnecessary regeneration refereed by time.
  • The system is equipped with dual tanks, which can operate in continuous or intermittent supply, depending on the peculiarities of each project and, being modulated, it can be expanded by simply attaching new modules.
  • The operation is fully automatic. The only function of the operator is to place periodically salt in the brine tank.
  • Extremely compact, it can be easily installed in the point of use.
  • Regeneration is done with softened water, ensuring longer life to the resin.
  • The variation in water quality to be treated can be compensated by the easy adaptation of the equipment to the new parameters.

Technical Specifications

Template Nominal Flow (m³/h)* Diameter tank (mm) Volume of Cationic Resin (L)** Media Height (mm) Duration of Regeneration (min) *** Length (m) Width (m) Height (m) Weight (kg)
RC2020 1,5 150 4,5 250 11 0,5 0,2 0,5 20
RC1827 2,7 200 9 320 29 0,8 0,5 1,1 50
RC2640 4,0 200 20 640 45 0,8 0,5 1,3 65
RC2743 4,3 250 45 920 90 0,9 0,5 1,6 95
RC5174 4,5 400 55 450 90 1,3 0,9 1,3 160
RC5275 7,5 400 115 920 90 1,3 0,9 1,9 180
HC224250 20,0 600 250 900 120 1,7 1,7 2,3 350
HC230400 32,0 750 400 900 150 2,0 2,0 2,4 470
HC330400 48,0 750 400 900 150 3,0 2,0 2,4 705
HC430400 64,0 750 400 900 150 4,0 2,0 2,4 940
HC240700 50,0 1000 700 900 150 2,5 2,5 2,5 810
HC340700 75 1000 700 900 150 3,6 2,5 2,5 1.215
HC440700 100,0 1000 700 900 150 5,0 2,5 2,5 1.620

*  Only indicative flow rate, equipment sizing should be performed by  Hidro Solo’s technical department.

** Resin volume per tank.

*** We emphasize that the regeneration duration does not interfere with system sizing, since the water supply does not cease.

**** Approximate weight (no resin and no salt).